LMF-12, TP-16 & TP-18: Two Post Lifts
12,000, 16,000 & 18,000 LB. CAPACITY LIFTS
Mohawk’s LMF-12, TP-16 and TP-18 lifts are clear floor above ground lift, capable of raising light and medium duty vehicles up to 18,000 lbs. The LMF-12, TP-16 and TP-18 lifts are twin cylinder direct drive design using no chains or cables.
- Dare to Compare 16–20k Lifts (PDF)
- How a Mohawk Two Post Lift is Made (PDF)
- What Makes A Mohawk A Mohawk (PDF)
Overview
HEAVY DUTY LIFTS FOR HEAVY DUTY SERVICE
MOHAWK AUTO LIFT DESIGN
- Mohawk columns are constructed of 3/4” thick forklift masts, for a lifetime of trouble-free service.
- Each Mohawk carriage rolls on 8 double-sealed, self-lubricating, steel ball bearing rollers (NOT plastic sliders).
- Two 4” heavy duty cylinders make for safer, steadier lifting than single cylinder lifts or models with tiny cylinders.
- Easily adjustable overhead stainless steel hydraulic lines can be set at any height (or routed in floor) to accommodate all tall trucks and vans.
- Low profile 5” swing arms fit under most passenger cars. Equipped with Mohawk’s 5″, 7 1/2″ and 10″ stackable lift adaptor pads.
MOHAWK’S PATENTED INDUSTRY LEADING SAFETY SYSTEMS
- Mohawk lifts feature all position mechanical safety locks in both columns, starting at the ground, to full lifting height.
- Patented infinite position, internal hydraulic safeties backed by external pressure compensated flow controls and velocity fuse valving.
- Swing arm restraints automatically engage upon lifting and automatically disengage when the vehicle has been fully lowered.
- The best, and most inclusive warranty in the lift business; 25 years structural, 10 year mechanical, plus limited lifetime cylinder warranty. Mohawk builds the best lifts, with the best warranty.
- Lease/purchase plans available for 1-5 years. Call Mohawk now!
LIFTING HOIST OPERATION
- Hydraulic fluid is pumped between the two cylinders through the overhead (or optional in-floor) stainless steel hydraulic lines. Patented hydraulic synchronization eliminates the need for restrictive height overhead covers, cables, pulleys, equalizer chains or obstructive floor plates.
- To raise the carriages, Mohawk’s LMF-12, TP-16/TP-18 use direct drive lifting rods which eliminate the wear & maintenance associated with lifts that use cables, chains, & overhead cable covers.
- Mohawk carriages roll on eight double sealed, self-lubricating, steel ball bearing rollers, for a lifetime of maintenance-free operation. Mohawk bearings are longer lasting, with less friction and wear than competitive lifts using plastic slide blocks that need constant greasing and maintenance.
Features & Images
Specifications
Please visit the Architects Section for all specifications.
- Overview
- Features & Images
- Options & Accessories
- Specifications
- Support
-
HEAVY DUTY LIFTS FOR HEAVY DUTY SERVICE
MOHAWK AUTO LIFT DESIGN
- Mohawk columns are constructed of 3/4” thick forklift masts, for a lifetime of trouble-free service.
- Each Mohawk carriage rolls on 8 double-sealed, self-lubricating, steel ball bearing rollers (NOT plastic sliders).
- Two 4” heavy duty cylinders make for safer, steadier lifting than single cylinder lifts or models with tiny cylinders.
- Easily adjustable overhead stainless steel hydraulic lines can be set at any height (or routed in floor) to accommodate all tall trucks and vans.
- Low profile 5” swing arms fit under most passenger cars. Equipped with Mohawk’s 5″, 7 1/2″ and 10″ stackable lift adaptor pads.
MOHAWK’S PATENTED INDUSTRY LEADING SAFETY SYSTEMS
- Mohawk lifts feature all position mechanical safety locks in both columns, starting at the ground, to full lifting height.
- Patented infinite position, internal hydraulic safeties backed by external pressure compensated flow controls and velocity fuse valving.
- Swing arm restraints automatically engage upon lifting and automatically disengage when the vehicle has been fully lowered.
- The best, and most inclusive warranty in the lift business; 25 years structural, 10 year mechanical, plus limited lifetime cylinder warranty. Mohawk builds the best lifts, with the best warranty.
- Lease/purchase plans available for 1-5 years. Call Mohawk now!
LIFTING HOIST OPERATION
- Hydraulic fluid is pumped between the two cylinders through the overhead (or optional in-floor) stainless steel hydraulic lines. Patented hydraulic synchronization eliminates the need for restrictive height overhead covers, cables, pulleys, equalizer chains or obstructive floor plates.
- To raise the carriages, Mohawk’s LMF-12, TP-16/TP-18 use direct drive lifting rods which eliminate the wear & maintenance associated with lifts that use cables, chains, & overhead cable covers.
- Mohawk carriages roll on eight double sealed, self-lubricating, steel ball bearing rollers, for a lifetime of maintenance-free operation. Mohawk bearings are longer lasting, with less friction and wear than competitive lifts using plastic slide blocks that need constant greasing and maintenance.
-
Please visit the Architects Section for all specifications.