PARALLELOGRAM LIFTS

35,000, 50,000, 75,000 & 100,000 lbs. Capacities

Surface Mounted or Flush Mounted with Runway Lengths from 26’ to 48’ long
parallelogram lifts
Request Information

  • Clear Work AreaClear Work Area
  • Control PanelControl Panel
  • Inside Control PanelInside Control Panel

Mohawks clear work area has no obstructive tie bar between the runways for total access.

Simple 3 button operation; Raise, Lower & Park (lock). 24 volt controls for operator safety, lockout standard, with easily programmable computer controls.

U.S. made G.E. internal computer & U.S. control components, simple wiring, 24 volt DC power, step-down transformer, fuses and starter box make the Mohawk parallelogram easy to operate, with nothing to maintain & readily accessible guaranteed parts availability.

  • Stable BaseStable Base
  • Stable BaseStable Base
  • Safety LocksSafety Locks

Mohawk base design assures stability is spread throughout the lift, and gives more strength than lifts which place all the load in one concentrated floor spot. Mohawk lifts only need minimal 6" thick concrete requirement

Counterbalanced manual or air- hydraulic tire dolly makes removing heavy truck tires a simple & safe one man job.

Mohawk safety latch racks are made of laser cut high strength T-1 steel, and assure safe smooth locking at all working heights.

  • Rolling JackRolling Jack
  • Flush MountFlush Mount
  • Flush MountFlush Mount

Optional rolling air-hydraulic jacks operate individually and make "wheels free" service simple. Optional florescent runway lighting illuminates the vehicle undercarriage.

For ultimate shop space savings, the flush mounted parallelogram is installed recessed in a pit, making the lift "invisible" when not in use to maintain maximum shop work flow.
  • Track LightingTrack Lighting

 

 

Optional florescent track lighting

 

 

 

FEATURES

  • A variety of track lengths from 26’ to 48’ long.

  • 35,000 through 100,000 lb. capacities.

  • Surface mounted, recessed or flush mounted.

  • Rolling air-hydraulic jacks in capacities of 25,000 lb.or 50,000 lb. capacities for wheels free service.

  • Full undervehicle access for all buses, trucks & heavy equipment.

  • Full 63” lifting height on either surface or flush mounted model.

  • Full and clear, unobstructed under-the-vehicle access without structural cross brace, or torsion bar.

  • 12 position mechanical safety locks in all legs starting at 24”.

  • All lifts are plumbed for air lines in the runways, prewired for florescent runway lighting with no separate 110V power supply required for added options.

DESIGN BENEFITS

  • The heaviest built parallelogram in the world for your heavy duty lifting requirements

  • Large 7 3/4" cylinders equal more power, lower PSI and longer component life.

  • Self lubricating composite bearings with chrome plate pivot pins for maintenance free operation.

  • Sturdy base design minimizes stress on the shop floor, allowing installation virtually anywhere.

  • No structural cross brace (torsion bar) between the platforms eliminates a trip hazard and the antiquated technology of a mechanical brace between the platforms.

  • Hydraulic safeties throughout consisting of pressure compensated flow control valves and velocity fuses.

CONTROL SYSTEM

  • Computer controlled platform synchronization is programmable for different lifting height to accommodate various vehicles, low ceilings or different height technicians.

  • Computer controlled dual high resolution, chain driven encoders monitor synchronous lifting and lowering 60 times per second.

  • The computers alpha-numeric LCD display performs self test on start-up, with information in plain english, with no flashing lights to
    be decoded.

  • Control system user settings are input directly from the keypad or special settings are password protected. No outside computer is needed for reprogramming various settings.

  • All platform switches and electrical sensors are located in the runway and not the shop floor. Continuous electrical runs from lifts console eliminates splice connections at the shop floor.

  • 24 volt control circuit provides operator safety during control
    console operation.

  • Manual pump and valving allow lowering in a no power situation.

OPTIONAL EQUIPMENT

  • Optional Equipment

  • Rolling Jacks

  • Florescent lighting

  • Tire Dolly (Manual or Air/Hydraulic)

  • Keyed Control Lock-Out

  • Stainless Steel Bases

  • Marine Paint (Rustoleum standard)



CLICK HERE TO LEARN ABOUT ALL OF MOHAWKS LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF

CLICK HERE FOR DETAILED SPECIFICATIONS
35,000 LB / 28' RUNWAY / SURFACE MOUNT
35,000 LB / 28' RUNWAY / FLUSH MOUNT
50,000 LB / 26' RUNWAY / SURFACE MOUNT
50,000 LB / 26' RUNWAY / FLUSH MOUNT
50,000 LB / 32' RUNWAY / SURFACE MOUNT
50,000 LB / 32' RUNWAY / FLUSH MOUNT
50,000 LB / 48' RUNWAY / SURFACE MOUNT
75,000 LB / 26' RUNWAY / FLUSH MOUNT
75,000 LB / 26' RUNWAY / SURFACE MOUNT
75,000 LB / 44' RUNWAY / FLUSH MOUNT
75,000 LB / 44' RUNWAY / SURFACE MOUNT
100,000 LB / 44' RUNWAY / SURFACE MOUNT


CLICK HERE FOR ROUGH SPECIFICATIONS

CLICK HERE FOR DATA SHEET

 

 

Car Lifts, Truck Lifts, Vehicle Lifts
           

 

Copyright ©2002-2006 Mohawk Resources, Ltd. Since 1981 Mohawk has manufactured the highest quality, safest auto and truck lifts available.
In addition to our high-quality safety systems, design and construction, Mohawk offers the most inclusive warranty in the service lift industry.
Just compare our lifts. Our staff will assist you with any technical questions you have about our entire line of vehicle lifts.