MODEL:

MP-18-15

MP-18-22

Capacity per post:

18,000 lbs.

16,000 lbs.

Lifting Speed:

66 sec.

66 sec.

Motor Rating:

2.5 H.P.

2.5 H.P.

Standard power requirements:

208/240 V, or 440/480 V 3 phase
single phase available

Amperage requirements:

10 (per post)

10 (per post)

Lifting height (stroke):

67"

67"

Lifting mechanism:

Direct drive hydraulic cylinders

Cylinder protection:

Full steel enclosure

Clearance between carriage & vehicle:

10"

Synchronization:

Automatic SIEMENS® PLC controlled

Lifting forks range:

13" to 24" wheels

Lifting fork height/angle:

3 1/2" and 28 degrees

Maximum tire diameter:

48"

Front Wheels:

6 5/8” sealed roller bearings

Steering system:

Pallet jack mech. w/OSHA approved handle & pressure relief valve

Mechanical safety locks:

19 positions starting at 12 "

External hydraulic safety systems:

Pressure compensated flow control valving & velocity fuses

Electrical safety systems:

Electronic sensors in each column

Floor requirements:

Any hard, level surface

Control voltage:

24 volts

Warranty:

3 years

Available Options Mobile jack stands (spring assisted)

Model

Range

Capacity per stand

MJS-18-30-18/24/30

18" to 30"

18,000/24,000/30,000

MJS-30-47-18/24/30

30" to 47"

18,000/24,000/30,000

MJS-47-75-18/24/30

47" to 75"

18,000/24,000/30,000

• Chassis contact lifting beam

• Extended forks

• 460 or 575 volt power units

• Runways & approach ramps

• Remote pendant control

• Fork lift adapter

• Automotive frame contact adapter

• Winged snow plow adaptor

• Wider carriages

• Lifting height limiter

• Single phase power

• Double wide columns

• Front to rear bumper adaptor

• Heavier capacities on request