Inground Lifts

Autop
8,500, 9,000 & 12,000 lb. Capacities

Multiflex 230-450
55,000, 66,000, 82500 & 99,000 lb. Capacities

---

2 Post Lifts

4 Post Runway Lifts

Mobile Column Lifts

Scissor Lifts

Parallelogram Lifts

In-Ground Lifts

Specialty Items

MOHAWK IN-GROUND LIFTS FROM STENHOJ

HEAVY DUTY – Stenhoj Multiflex 230-450 High Pressure In-ground lift

Electro-hydraulic in-ground lifts

The high pressure, low volume lift that started it all, developed and installed in 1981.

Before environmental concerns were the hot topic Stenhoj saw the advantages of a continuous trench low oil volume design. Some companies claim they have been building high pressure lifts for many years, but no one has built a highpressure low volume self-contained lift longer than Stenhoj.

A single concrete vault to houses both front and rear pistons to assure that all service and repairs can be done from the top with out the need to dig. There are no concerns about rusting walls or moisture attacking the lifts structure. The lift was designed to be simple to install, simple to operate and simple to maintain.

Stenhoj uses a single high pressure piston housed in a massive outer chrome casing that slides in a lubricated top bearing for rigidity and stability under the highest load. This simple design is not dependent on multiple cylinders or lifting stages which add to your overall maintenance costs in the future.

With just 6 gallons per cylinder, multiflexuses the lowest amount of oil of any other lift design andits exclusive high pressure design assures years of trouble free service.

All cylinders and lock bars are fully chrome plated to insure surviving the elements while offering superior corrosions protection. The locking system is fully hydraulic and operates automatically whenever the power unit is activated. This means that there are no air cylinders to rely on for lift safety or to present a service issue in the future.

The lifts overhead pendant control runs on afull lengthtrack system that assure the controlsare with you when you need them. This makes certain that the lift is set correctly to each vehicle and assures the safe lifting of the most difficult vehicles.

Galvanized shutter plates that move with the front piston at the push of a button offers the safety of a continuous covered work area.

Hydraulic geared motor moves the front piston quickly and efficiently into position using a welded linked chain that won’t kink. The Mohawk – Stenhoj partnership will provide you with the very best in performance and service.

Operates with the lowest amount of oil in the industry

Quality to the last detail

• Hydraulic geared motor for movement of front cylinder
• Rear cylinder is equipped with a cover plate, which assures the rear piston is completely covered in the lowered position
• One or two movable cylinders for easy adjustment to accommodate different wheel bases
• External hard-chrome plated safety leg on eachcylinder
• For operator safety, the shutter plates move to continually cover the pit
• Operated from a remote control, the lift can be adjusted for wheel bases and also raised or lowered.
• Concrete containment vault 8" thick walls (will not detereriorate from electrolysis or rust).

Power units Six gallons per piston (lowest in the industry)		High Pressure Cylinder Seal is protected within the hard chrome cylinder (not exposed to the shop element)		Available accessory Optional swing arms make the front post an 11,000lb. single post lift in just minutes

CLICK HERE TO LEARN ABOUT ALL OF MOHAWKS LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF

CLICK HERE FOR DETAIL SPECIFICATIONS
Model Multiflex 230
Model Multiflex 300
Model Multiflex 345
Model Multiflex 450