Vehicle lifts are among the most productive tools in a fleet operation, increasing technician efficiency and keeping more vehicles ready for service. As a fleet manager, ensuring shop safety—and that every technician goes home safely at the end of each shift —is your responsibility. Raising a vehicle overhead introduces inherent risk if lifts are not properly inspected, technicians are not adequately trained, or safety locks are not consistently used. Vehicle lift safety is not something that can be taken for granted.
If an incident were to occur in your shop involving a vehicle lift, an OSHA investigator would focus on three key questions: What did you know? When did you know it? And what did you do about it? The one answer you never want to give is that you were aware of a problem and failed to take action. Proactive attention to lift safety isn’t just a best practice—it’s essential for protecting your technicians, your operation, and your responsibility as a fleet manager.
Compliance with American National Standards Institute (ANSI) requirements is critical, as both OSHA and the Public Employees Occupational Safety and Health (PEOSH) agencies rely on ANSI standards to maintain the highest levels of vehicle lift safety. Adhering to these standards helps ensure technicians go home safely every night and have confidence in the lifts and accessories they use every day. Beyond safety, compliance also reduces risk—helping avoid citations and costly fines in the event of an unannounced OSHA inspection.
To make the best safety decisions for your shop’s lifts follow these simple guidelines.
Buy and Use ONLY Certified Lifts and Certified Options
Safety in the shop begins with the fundamentals: safe lifting principles apply to both light and heavy lifting, regardless of the equipment being used. While two-post, four-post, mobile column, parallelogram, vertical-rise, and in-ground lifts each utilize different mechanical safety systems, they all share one critical requirement: a single, nationally recognized safety standard.
That standard is ANSI/ALI ALCTV, administered by the Automotive Lift Institute (ALI). Under this standard, vehicle lifts and accessories are independently tested and certified by a third-party laboratory. Certification includes rigorous load testing as well as compliance with the UL 201 electrical safety standard.
Once certified, a vehicle lift earns the ALI Gold Label, signifying compliance with the ANSI safety standard. When choosing accessories or options for a vehicle lift, certification is also critical. Accessories and options must be certified for use with ALI-certified lifts—using uncertified accessories and options will decertify the lift and put both safety and compliance at risk.
Inspect Your Lifts
Like the vehicles you service, vehicle lifts are machines—and the ANSI standard requires that they be inspected annually by an experienced lift inspector. In addition to regular checks performed by technicians, the annual inspection must be completed by a qualified lift inspection company. The best place to start is the lift manufacturer, as they employ factory-trained technicians who are intimately familiar with the specific makes and models in your shop. As a secondary resource, the Automotive Lift Institute (ALI) also provides a directory of certified lift inspectors available through its website: https://www.autolift.org/find-a-certified-auto-lift-inspector/
Know You Are Locked
In accordance with the ALI standard—and the common-sense rule of “never use a jack without a jack stand”—vehicle lifts are equipped with mechanical safety locks, also known as load-holding devices. The challenge for shop managers is knowing whether technicians are consistently lowering the lift onto those locks. In most cases across the industry, the honest answer is: you don’t know—except with certain safety features offered by some manufacturers.
Some lift manufacturers provide a hydraulic weight gauge that displays the load carried by the lift. While this allows technicians to see the weight of the vehicle, it also serves acritical safety function. When a lift is properly lowered onto the mechanical locks, the gauge will read zero. If you walk past a lift and see an F-450 still showing 13,800 lbs., it is clear that the lift has not been lowered onto the locks and is still being supported hydraulically.
Other manufacturers offer digital display screens that show both vehicle weight and whether the lift has been fully lowered onto the safety locks. Some systems even include audible alerts—similar to a backup alarm—that continue to sound until the lift is correctly resting on the mechanical locks. These features remove the guesswork and help ensure lifts are being used the way they were designed to be used—safely.
Do Not Overload
Manufacturers of common two-post, side-by-side lifts specify that none of the four swing arms may be overloaded, regardless of the lift’s total rated capacity. For example, it’s easy to assume that placing a 13,200-pound ambulance on a 16,000-pound lift is within safe limits. However, axle weight distribution tells a different story.
If the front axle weighs 4,000 pounds and the rear axle weighs 9,200 pounds, the load is not evenly shared; the rear swing arms are bring over loaded. On a 15,000-pound rated lift, each swing arm is typically rated for 3,750 pounds. When one end of the vehicle weighs 9,200 pounds, each of the two swing arms supporting that end must carry at least 4,600 pounds—exceeding the per-arm rating. In this scenario, the lift would require a minimum combined arm capacity of 18,400 pounds to safely support an ambulance.
This is why two-post, side-by-side lifts are frequently overloaded—even when the total lift capacity has not been exceeded. Take a moment to look around your shop and evaluate whether any lifts may be overloaded due to the heavy rear axle weights common on today’s work trucks and emergency vehicles.
Technician Training – Must Be Done
Like any product, vehicle lifts vary in style, type, capacity, longevity, and warranty. However, ANSI regulations require annual technician training to remain in compliance with safety standards.
According to Automotive Lift Institute President Bob O’Gorman, annual operator training is a critical component of lift safety and ANSI compliance. More than four million lift safety training sessions have already been completed through ALI programs, underscoring both the availability—and the importance—of ongoing technician education. Annual training is not optional—it’s essential to lift safety and compliance.
ANSI also mandates annual training for technicians on proper lift operation. While this may seem excessive, consider how forklift operators are handled in most facilities: each year, operators complete safety training, watch instructional material, and pass a test, with documentation placed in their personnel files in the event of an incident.
The same level of accountability applies to vehicle lifts, and these standards are often established before a technician even enters the professional workforce; most high school vocational-technical (vo-tech) or BOCES programs require rigorous testing prior to any lift use. ANSI requires technicians to complete the training and pass a written test on lift operation and safety, creating documented proof of compliance and reinforcing safety.
Lift Accessories and Options
When selecting accessories or options for a vehicle lift, certification matters. Any accessory used on an ALI-certified lift must itself be certified; using non-certified
accessories void the lift’s certification and compromise safety and compliance.
While mobile lifts are popular in fleet environments, most manufacturers also offer certified front-to-rear adapters for lifting medium-duty work trucks. However, not all certified options are created equal. According to information published by the Automotive Lift Institute (ALI), some manufacturers rate these adapters so low they can barely lift a light-duty pickup, while others certify them for capacities as high as 26,000 pounds—allowing trucks to be safely raised with the tires fully off the ground. Understanding the option ratings is critical when matching lift options to the vehicles in your fleet.
A similar issue applies to certified forklift adapters. Many lift manufacturers offer forklift-specific adapters, but their rated capacities can vary widely. For context, a 10-ton forklift weighs approximately 20,000 pounds. To safely service this equipment, the certified forklift adapter must be properly rated for the load—not merely labeled as “certified.”
When using mobile lifts, manufacturers typically offer high-reach jack stands as supplemental support stands. It is essential to verify that these stands are also certified, as the use of non-certified stands will void the certification of the lift system as a whole.
From a practical standpoint, mobile lifts are often used on vehicles engineered with dual rear tires. If a truck is designed to operate on four rear tires, it should be lifted by all four. Lifting only the outer tire can over-pressurize the tires and create unsafe conditions. While some manufacturers offer mobile lift forks wide enough—such as 22-inch forks—to engage both rear tires, extending the forks on certain brands can significantly reduce column capacity, in some cases from 18,000 pounds down to 12,000 pounds per column. For larger trucks, this reduced capacity may be inadequate.
The takeaway is simple: lift options and accessories must be evaluated not just for availability, but for certification, capacity, and proper application to the vehicles being serviced.
Vehicle lift safety is not defined by a single decision, but by a series of informed choices made over time—selecting certified equipment, ensuring proper inspections, verifying correct use of safety systems, training technicians, and matching lift options to the vehicles being serviced. Together, these practices form a defensible, proactive approach to safety that protects technicians, supports compliance, and reinforces operational accountability.
Fleet managers are best served by working with lift manufacturers that not only meet ANSI/ALI certification requirements, but also demonstrate a long-term commitment to safety engineering, inspection support, and technician education. Companies such as Mohawk Lifts, with decades of experience designing and manufacturing ALI-certified vehicle lifts for fleet and heavy-duty applications, exemplify the role manufacturers can play in supporting safer shops—not just through equipment, but through knowledge, standards adherence, and ongoing partnership.
Ultimately, investing in lift safety is an investment in people, productivity, and peace of mind. When lifts are selected, maintained, and used as intended, they remain what they were designed to be: one of the safest and most productive tools in a fleet operation.
Download the PDF version here: https://mohawklifts.com/wp-content/uploads/2026/11/VehicleLiftSafetyStandards_MohawkLifts_Final.pdf